Page 1
This Installation Guide gives background information on the SBC-775, and shows you how to configure the card to match your application and prepare it for installation into your system. Part no. 2007775001 2nd Ed. Printed in Taiwan Nov. 1998 SBC-775 Installation Guide...
Page 3
Serial port: COM 1 CN10 Serial port: COM 2 CN11 USB port CN12 PS/2 keyboard and mouse CN13 Floppy drive connector CN14 (Reserved) ATX soft power switch Reset External SMI ATX feature connector External keyboard connector (Reserved) SBC-775 Installation Guide...
Page 4
266 MHz open open open open 300 MHz* open closed open open 333 MHz open open closed open Function Jumper setting Keep CMOS data 1-2 closed* Clear CMOS data 2-3 closed * default * default SBC-775 Installation Guide...
Page 6
Address C800 closed closed closed CC00 closed closed open D000 closed open closed D400 closed open open D800 open closed closed DC00 open closed open E000 open open closed Disabled* open open open * default SBC-775 Installation Guide...
Page 7
The SBC-775 can support an advanced soft power switch function if an ATX power supply is used. To enable the soft power switch function: 1. Take the specially designed ATX-to-PS/2 power cable out of the SBC-775's accessory bag. 2. Connect the 3-pin plug of the cable to J7 (ATX feature connector).
Page 8
"On" mode will turn the system off. Users can also identify the current power mode through the system's power LED, as indicated below: ATX Power Mode LED Status System On System Suspend Flashes eight times/sec. System Off Flashes once/sec. SBC-775 Installation Guide...