Table of Contents
Advertisement
3.9.4 PM Control by APM
If advanced power management is installed on your system,
selecting Yes gives better power savings.
The choices: Yes(Default), No
3.9.5 Video Off Option
Select the power saving modes during which the monitor goes
blank.
The Choices:
Always on
Monitor remains on during power saving
modes.
Suspend--Off Monitor blanked when system enters
(Default)
suspension mode.
All Modes--Off Monitor blanked when system enters
any power saving mode.
3.9.6 Video Off Method
This determines the manner in which the monitor is blanked.
The Choices:
V/H SYNC + Blank(Default)
This Selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer
Blanck Screen
This option only writes blanks to the video buffer
DPMS
Initial display power management signaling
3.9.7 MODEM Use IRQ
The Choices: 3 (Default), 4, 5, 7, 9, 10, 11, NA
3.9.8 Soft-Off by PWRBTN
The Choices: Instant-Off(Default), Delay 4 Sec
Chapter 3 Award BIOS Setup
57
Advertisement
Table of Contents
