Aaeon SBC-657 User Manual page 60

compliance with PCI specification version 2.1.
The choices: Enabled, Disabled(Default)
3.7.19 PCI #2 Access #1 Retry
When disabled, PCI#2 will be connected until access finishes
(default). When enabled, PCI#2 will be disconnected if max
retries are attempted without success.
The choices: Enabled(Default), Disabled.
3.7.20 AGP Master 1 WS Write
System will run single wait state delay before write data from
buffer, if user set to disable system will run twice wait states so
system can stable.
The choices: Enabled, Disabled(Default)
3.7.21 AGP Master 1 WS Read
System will run single wait state delay before read data from
buffer, if user set to disable system will run twice wait states so
system can stable.
The choices: Enabled, Disabled(Default)
50 SBC-657 User Manual