Strymon Riverside User Manual page 13

Riverside
- Multistage Drive
Power Up Modes – Bypass Mode Selection
Setting Riverside to Buffered Bypass mode preserves the high
frequency response of your guitar signal through your pedal chain
and long cable runs.
Press and hold the ON
1
footswitch while powering
up the pedal. Once both
LEDs flash, release the
footswitch.
Press the ON or FAVORITE footswitch to store
3
The Bypass mode and begin using Riverside.
Turn the LEVEL knob to select
2
True Bypass or Buffered
Bypass
GREEN - True Bypass
(default)
RED - Buffered Bypass:
Using Buffered Bypass allows
Volume mode and Boost
Switch mode.
®
pg 13