Strymon Riverside User Manual page 19

Riverside
- Multistage Drive
External Control – Using Favorite Output
Use Riverside to recall the Favorite setting of another connected
Strymon pedal.
Configure the BOOST jack to
1
send Favorite Out messages.
(See page 14
about configuring the Boost
jack.)
Connect the BOOST jack of
Riverside to the EXP input of
another Strymon pedal with a
TRS cable.
Save a Favorite setting on the
3
connected Strymon pedal.
OPTIONAL STEP: Store a new
Favorite setting on Riverside
to go along with the Favorite
setting on the connected
Strymon pedal.
for more detail
Make sure the connected
2
pedal is set to Favorite EXP
mode.
Please refer to the favorite
switch setup section of
the connected pedal's
owner's manual for details.
All manuals available at
strymon.net/support.
INPUT EXP LEFT OUT
Pressing the FAVORITE switch
4
on Riverside will toggle the
Favorite setting on both
Riverside and the connected
Strymon pedal as well.
®
9VDC
RIGHT OUT
+ -
pg 19