Strymon Riverside User Manual page 31

Riverside
- Multistage Drive
Saving Presets in MIDI Mode
• When in MIDI mode, the currently loaded settings can
be saved to any of Riverside's 300 preset locations at
any time.
• To enter SAVE mode, press and hold the FAVORITE
footswitch. The LED will illuminate in BLUE.
• Send the unit a patch change message from the
connected MIDI device. The LED will flash and
Riverside will save the settings to that preset location.
• To save the preset to the currently loaded preset
location, press the FAVORITE footswitch.
NOTE: An easy way to check if your Riverside is
running version 1.0 or version 1.2 firmware is to try
setting the MIDI Expression functionality. If you are
running version 1.0 firmware, the ON LED will not
change as you turn the TREBLE knob.
Saving Presets in MIDI Mode
®
pg 31