Strymon Riverside User Manual page 20

Riverside
- Multistage Drive
External Control – Expression Mode
Use a TRS Expression pedal to control the knobs of Riverside
Connect the Expression pedal to
1
the EXP jack of Riverside using
a TRS cable.
NOTE: It is also possible to
assign the BOOST jack as the
input for Expression mode.
This is useful if you wish to
connect MIDI to the EXP jack,
but still wish to use a pedal to
control Expression. (See
14 for details about assigning the
BOOST jack.)
Press and hold both FAVORITE
2
and ON footswitches for a few
seconds until both LEDs begin
blinking GREEN.
page
®
pg 20