Strymon Riverside User Manual page 18

Riverside
- Multistage Drive
External Control – Using Favorite Input
Connect a MiniSwitch with a TRS cable to toggle the on-board
Favorite preset on and off.
Ensure that the EXP
1
jack is configured for
FAV IN. (See
for more info.)
Connect a Switch
with a TRS cable
to the EXP jack of
Riverside.
Dial in a setting
2
on Riverside
using the knobs
and switches
for your desired
sound.
Press and hold Riverside's on-
3
board FAVORITE switch for 2
seconds to save this setting as
a new on-board Favorite sound.
NOTES:
The on-board FAVORITE switch will not toggle the Favorite preset
when Riverside is set to Favorite In mode and a MiniSwitch is
connected to the EXP jack.
Saving Presets works differently when using MIDI. (See
for more info.)
page 16
®
OR
TRS
®
page 31
pg 18