Strymon Riverside User Manual page 21

Riverside
- Multistage Drive
External Control – Expression Mode
Rock the expression pedal back to the
3
HEEL position and only the FAVORITE
LED will blink GREEN.
Set the knobs the way you would like
4
them to be in the HEEL position. The
FAVORITE LED will turn
that the setting has changed.
Rock the xpression pedal forward to the
5
TOE position and only the ON LED will
blink GREEN.
Set the knobs you would like to control
6
to the setting for the TOE position of
the expression pedal. The ON LED will
turn red to indicate that the setting has
changed.
Press the FAVORITE or ON footswitch
7
once to save the expression settings.
NOTE: Expression pedal settings
are saved and recalled as part of the
on-board Favorite setting and MIDI
accessible presets.
NOTE: If you are using the EXP jack for
MIDI communication, it is possible to
connect the pedal to the BOOST jack
instead to use an expression pedal. (See
for details on configuring the BOOST
14
page
jack for Expression mode.)
RED
to indicate
(cont.)
®
pg 21