General Settings; Set Midi Channel - Strymon Riverside User Manual

Riverside
- Multistage Drive
Power Up Modes
Below is a list of global parameters and functions that are
accessed via a power up procedure. All power up functions persist
through power cycles.

GENERAL SETTINGS

BYPASS MODE
(See page 13 for an
illustrated description)

SET MIDI CHANNEL

(See page 28 for an
illustrated description)
FACTORY RESET
(See page 23 for an
illustrated description)
Press and Hold the ON footswitch at power
up until the LEDs flash. Release and use
knobs as described below. Press any
footswitch to store settings & exit.
Turn LEVEL knob - status shown on ON LED
True Bypass =
Buffered Bypass =
Turn DRIVE knob - status shown on
FAVORITE LED
1 = Green (default)
Amber
2 =
Red
3 =
4-16 = Blue
(channel set by next MIDI
Program Change message)
Sweep MIDDLE knob twice to RESET -
status shown on FAVORITE LED
Turn 1 = Amber
Turn 2 = Red
Amber
Turn 3 =
Turn 4 = Both LEDs flash Red, pedal
resets & power cycles
Green
(default)
Red
®
pg 38