Strymon Riverside User Manual page 30

Riverside
- Multistage Drive
MIDI – Expression On/Off
This setting selects whether Riverside will respond to incoming
MIDI Expression messages. If your rig uses MIDI Expression
messages with multiple pedals that are set to the same MIDI
Channel, this setting can be used to determine which pedal(s) will
respond to expression messages for a given preset.
Press and hold the ON
1
footswitch until both LEDs blink.
Release the ON footswitch.
Press the ON footswitch to
3
store the setting to Riverside.
Turn the TREBLE
2
knob to select
whether Riverside
will respond to
incoming MIDI
Expression
messages (CC
#100).
RED
(momentary
flash) - Riverside
will not respond to
MIDI Expression
messages.
BLUE (momentary
flash) - (default)
Riverside will
respond to MIDI
Expression
messages.
®
pg 30