Strymon Riverside User Manual page 22

Riverside
- Multistage Drive
External Control – Volume Mode
Use a TRS Volume pedal to control the output volume.
Connect the expression pedal
1
to the EXP jack of Riverside.
Set the LEVEL knob to the
2
setting you would like for the
highest TOE down position of
the expression pedal.
When the FAVORITE setting
3
is engaged, the highest
TOE down position of the
expression pedal will
correspond to the setting that
the LEVEL knob was saved as
for the favorite setting.
NOTE: When Riverside is in Buffered Bypass mode and the
Expression jack is configured for Volume mode, the pedal will
still function as a Volume pedal whether the effect is bypassed or
engaged.
NOTE: The default assignment for the EXP jack is Volume mode. If
this has been changed, the EXP jack assignment must be changed
back
to Volume mode. (See
to Volume mode.)
NOTE: If you are using the EXP jack for MIDI communication, it is
possible to connect the pedal to the BOOST jack instead to control
the volume. (See
for Volume mode.)
for details on configuring the EXP jack
16
page
for details on configuring the BOOST jack
14
page
®
pg 22