DIG
- Dual Digital Delay User Manual
Features
SOUND DESIGN
• Two simultaneous, integrated delays, with unique digital rack delay voicings
• Five dual delay adjustment and tone shaping knobs: Time, Time 2, Mix, Mix 2, Repeats
• One modern and two classic digital delay voicings: 24/96, adm, 12 bit
• Five rhythmic subdivisions: Triplet, Eighth, Golden Ratio, Dotted Eighth, Dotted Quarter
• Three choices for delay line modulation: Off, Light, Deep
• Secondary functions for deep control: Delay 1 Subdivision, Sync/Free Mode, Filter, Config, Delay 2 Repeats
• Selectable Free Mode disables subdivisions and synchronization
• Press and hold Circular Repeats effect
• 20ms - 1.6s delay range (40ms - 3.2s with Half Note Delay 1 Subdivision)
INS, OUTS, & SWITCHES
• High impedance mono input, with selectable TRS stereo input
• Stereo output
• Three signal routing configurations: Series, Parallel, Ping Pong
• Selectable Kill Dry mode
• Tap tempo and Bypass footswitches
• Expression pedal input allows the connection of either an expression pedal (for selectable control over any
knob parameter), external tap pedal (for remote control of tempo), or Favorite switch (to save a Favorite preset)
MORE
• +8dBu maximum input level easily handles instrument and line signals
• Premium analog front end and output section
• Analog dry path for a zero latency dry signal that is never converted to digital
• Super high performance SHARC DSP in a compact form factor
• 32-bit floating point processing
• Strong and lightweight anodized carnation pink aluminum chassis
• Designed and Built in the USA
Specifications
Input Impedance
Output Impedance
Signal to Noise
A/D & D/A
Max Input Level
Frequency Response
DSP performance
Bypass Switching
Dimensions
Power Requirements
Input Voltage
Polarity
Required Current
1Meg Ohm
100 Ohm
115 dB typical
24-bit 96kHz
+8dBu
20Hz to 20kHz
1596 MegaFLOPS
True Bypass (electromechanical relay switching)
or high-quality, transparent Analog Buffered Bypass (selectable)
4.5" deep x 4" wide x 1.75" tall
Maximum 9V DC
Center Negative
Minimum 250mA
®
pg 12