Strymon Riverside User Manual page 28

Riverside
- Multistage Drive
MIDI – Configuring Riverside to Use MIDI
Step 2 – Set MIDI Channel
This determines which MIDI channel Riverside will use to send and
receive MIDI data. See the illustrated guide below for complete
instructions.
NOTE: To select channel 4-16, you will need to connect Riverside to a
MIDI device.
Press and hold the ON
1
footswitch while powering
up the pedal. Once both
LEDs flash, release the
footswitch.
Press the ON footswitch
3
again to store the MIDI
channel and begin.
Turn the DRIVE knob on the
2
to set the MIDI receive channel.
Both LEDs will flash momentarily
as the channel is changed.
GREEN
(default)
AMBER
RED
- Channel 3
BLUE - Channel 4-16
(Requires ¼" MIDI
connection.) Once the
LED turns BLUE, it will
blink until the pedal
receives a MIDI Program
Change message. Once
a message is received,
the pedal will be set to
the MIDI channel that
carried the message
and the LED will stop
blinking.
(cont.)
- Channel 1
- Channel 2
pg 28
®