Fisher FIELDVUE DVC6200 Instruction Manual page 91

Parts List
Note
Part numbers are shown for
recommended spares only. For part
numbers not shown, contact your
Emerson Process Management sales
office.
Parts with footnote numbers shown
are available in parts kits; see footnote
information at the bottom of the page.
Key Description
Note
Housing
(see figure 8-2)
(7)
1 Housing
(2)
52 Vent, plastic
(7)
271 Screen
287 Gasket, Housing A only (used for GX actuator)
288 Seal, Housing A only (used for GX actuator)
Common Parts
(see figure 8-2 and 8-3)
(1)
16* O-ring (3 req'd)
29 Warning label, for use only with LCIE hazardous area
classifications
(2)
33 Mach Screw, pan hd, SST
38 Cap Screw, hex socket, SST
43* Cover Assembly (includes cover screws)
Aluminum Construction
Standard
Extreme temperature option
(fluorosilicone elastomers)
48 Nameplate
49 Screw, self tapping (2 req'd)
(6)
61 Pipe Plug, hex socket
Housing A with relay C (2 req'd ) (used for GX actuator)
Housing A with relay B (1 req'd) (used for GX actuator)
Housing B with relay B and C (1 req'd)
(used for all actuators except GX)
Not required for relay A
63 Lithium grease (not furnished with the instrument)
64 Anti-seize compound (not furnished with the instrument)
65 Lubricant, silicone sealant (not furnished with the instrument)
(2)
154 Retaining Ring (3 req'd)
236 Screen (required for relay B and C only)
(1)
237 Module Base Seal
September 2010
Part Number
(3 req'd)
(2)(6)
(3 req'd)
38B9580X022
38B9580X032
(6)
(7)
Key Description
Module Base
(see figure 8-2)
(6)
2 Module Base
(6)
11 Drive Screw (2 req'd)
(1)
12 O-ring
(6)
19 Label, Shield Assembly
(6)
61 Pipe Plug, hex socket (3 req'd)
(6)
243 Slotted Pin (flame arrestor)
I/P Converter Assembly
(see figure 8-2)
23 Cap Screw, hex socket, SST
(1)(3)(5)
39* O-ring
(5)
41 I/P Converter
(5)(8)
169 Shroud (not shown, see figure 7-3)
(1)(5)
210* Boot, nitrile (2 req'd) (see figure 7-3)
(1)(3)(5)
231* Seal Screen
Relay
(see figure 8-2)
24* Relay Assembly, (includes shroud, relay seal, mounting screws)
Standard (nitrile elastomers)
Standard Bleed
Housing A (used for GX actuator)
Single-/acting direct (relay C)
Single-acting reverse (relay B)
Housing B (used for all actuators except GX)
Single-acting direct (relay C)
Double-acting (relay A)
Single-acting reverse (relay B)
Low Bleed
Housing A (used for GX actuator)
Single-acting direct (relay C)
Single-acting reverse (relay B)
Housing B (used for all actuators except G)
Single-acting direct (relay C)
Double-acting (relay A)
Single-acting reverse (relay B)
Extreme Temperature option (fluorosilicone elastomers)
Standard Bleed
Single-acting direct (relay C)
Double-acting (relay A)
Single-acting reverse (relay B)
Low Bleed
Single-acting direct (relay C)
Double-acting (relay A)
Single-acting reverse (relay B)
*Recommended spare
1. Available in the Elastomer Spare Parts Kit
2. Available in the Small Hardware Spare Parts Kit
3. Available in the Seal Screen Kit
5. Available in the I/P Converter Kit
6. Available in the Spare Module Base Assembly Kit
7. Available in the Spare Housing Assembly Kit
8. Available in the Spare Shroud Kit
Parts
Part Number
(3 req'd)
(2)(8)
(4 req'd)
38B5786X182
38B5786X172
38B5786X132
38B5786X052
38B5786X092
38B5786X202
38B5786X192
38B5786X152
38B5786X072
38B5786X112
38B5786X142
38B5786X032
38B5786X102
38B5786X162
38B5786X082
38B5786X122
83
8