Table of Contents
Advertisement
Function added to set the input and output signal routing for each individual channel
Input signal routing can now be set per channel. Output signal
routing can also now be set per channel.
The
and
INPUT ROUTING 1
have been replaced by a
ROUTING
Setting input signal routing
Follow these steps to set input signal routing.
1.
Open the
page and select the
ROUTING
item. Then, press the MULTI JOG dial to open the
settings list.
ROUTING
INPUT ROUTING
NOTE
When an interface card with less than 64 input signal channels
is installed, the names of unavailable input connectors appear
gray.
For example, if an IF-AE16 card with 16 I/O channels is in-
stalled in SLOT1, the
SLOT1-17 IN
items will appear gray.
2.
Turn the MULTI JOG dial to select the channel you want
to set, and press the MULTI JOG dial to open the
setting screen.
ROUTING
INPUT ROUTING
3.
Select the
item and set how setting values are
EDIT MODE
changed.
Press the MULTI JOG dial to confirm the EDIT MODE and
move the cursor to the next item. You can also use the .
and / buttons to move the cursor.
Option
(default): Change settings for one channel
Individual
: Change settings for eight channels at a time.
8ch BLOCK
: Set a group of multiple channels to be
BATCH SETUP
changed at the same time.
DA-6400/DA-6400dp
menu pages
INPUT ROUTING 2
page for these functions.
INPUT ROUTING
INPUT
settings list
to
SLOT1-64 IN
INPUT
setting screen
at a time.
4.
Operations differ according to the selected
selected
o
Individual
The name of the channel selected in step 1 appears to the
left of the selection area.
Turn the MULTI JOG dial to select an input signal.
Options:
SLOT1-01 IN – SLOT1-64 IN
SLOT2-01 IN – SLOT2-64 IN
(128 options)
Press the MULTI JOG dial to confirm the setting value and
reopen the
INPUT ROUTING
selected
o
8ch BLOCK
An 8-channel block that includes the channel selected in
step 1 appears to the left of the selection area.
Turn the MULTI JOG dial to select an input signal block.
Options:
SLOT1 01-08
SLOT1 17-24
SLOT1 33-40
SLOT1 49-56
SLOT2 01-08
SLOT2 17-24
SLOT2 33-40
SLOT2 49-56
Press the MULTI JOG dial to confirm the setting value and
reopen the
INPUT ROUTING
selected
o
BATCH SETUP
appears to the left of the selection area.
RANGE SELECT
Press the MULTI JOG or . and /buttons to move the
blue cursor, and turn the MULTI JOG to set the following
values.
o First and last numbers of the range of channels for
which you want to change settings
o Slot number and input connector starting number for
the input signal you want to route
Move the blue cursor to
dial to open a pop-up confirmation message.
TASCAM DA-6400/DA-6400dp
EDIT MODE
,
setting list.
,
,
SLOT1 09-16
,
,
SLOT1 25-32
,
,
SLOT1 41-48
,
,
SLOT1 57-64
,
,
SLOT2 09-16
,
,
SLOT2 25-32
,
,
SLOT2 41-48
,
(16 options)
SLOT2 57-64
setting list.
and press the MULTI JOG
APPLY
.
31
Advertisement
Table of Contents
