Theater Play Function Added - Tascam DA-6400 Manual

Theater play function added

A theater play function has been added. This allows the addition of marks for the playback starting and ending points of each take and the
playback of the set parts of multiple takes in order.
Theater play settings
Settings are made with the
THEATER PLAY
menu page.
PLAY SETUP
MODE
This sets the theater play operation mode.
Option
: This disables the theater play function.
OFF
: This enables the theater play function.
ON
DA-6400/DA-6400dp
Theater play playback range
item added to the The playback range of each take is set with marks.
The mark points with the following names are the starting and
ending points in theater play.
Start point mark
names
End point mark
names
* Example of operation with the following settings
Mark name Function
$START
$STANDBY
$END
No $END
=
PLAY MODE ALL
=
REPEAT MODE ON
=
THEATER PLAY ON
Take range
Playback range
Take 1 $STANDBY, so pause
s$STANDBY
Take 2 $START, so continue playing
s$START
$STANDBY, so pause
Take 3
s$STANDBY
If
REPEAT MODE
$STANDBY in the first take.
If REPEAT MODE is OFF, stop .
TASCAM DA-6400/DA-6400dp
When moving to this mark
from the $END of another
take, playback will continue
from this point.
When moving to this mark
from the $END of another
take, playback will pause at
this point.
Take playback will end at this
mark, and it will move to the
first $START or $STANDBY
mark in the next take.
If the next take does not have
a $START or $STANDBY mark,
it will move to the beginning
of the next take and continue
playback.
Playback will continue to the
end of the take and continue
according to the operation
mode.
s$END
Detected, so jump
s$END
Detected, so jump
s$END
is , return to $START or
ON
17