Table of Contents
Advertisement
When the confirmation pop-up message is open, press the
MULTI JOG dial to change to setting the multiple selected
channels at the same time, and reopen the
setting list.
ING
When the confirmation pop-up message is open, press the
EXIT [PEAK CLEAR] button to close the message.
Setting output signal routing
Follow these steps to set output signal routing.
1.
Open the
page and select the
ROUTING
item. Then, press the MULTI JOG dial to open the
settings list.
ROUTING
OUTPUT ROUTING
NOTE
When an interface card with less than 64 output signal chan-
nels is installed, the names of unavailable output connectors
appear gray.
For example, if an IF-AE16 card with 16 I/O channels is installed
in SLOT1, the
SLOT1-17
appear gray.
2.
Turn the MULTI JOG dial to select the output connector you
want to set, and press the MULTI JOG dial to open the
setting screen.
PUT ROUTING
OUTPUT ROUTING
3.
Select the
item and set how setting values are
EDIT MODE
changed.
Press the MULTI JOG dial to confirm the
move the cursor to the next item. You can also use the .
and / buttons to move the cursor.
Option
(default): Change settings for one channel
Individual
: Change settings for eight channels at a time.
8ch BLOCK
: Set a group of multiple channels to be
BATCH SETUP
changed at the same time.
32
TASCAM DA-6400/DA-6400dp
DA-6400/DA-6400dp
INPUT ROUT-
OUTPUT ROUTING
OUTPUT
settings list
OUT to
OUT items will
SLOT1-64
OUT-
setting screen
EDIT MODE
at a time.
4.
Operations differ according to the selected
o
Individual
The name of the output connector selected in step 1 ap-
pears to the left of the selection area.
Turn the MULTI JOG dial to select an output signal.
Options:
Press the MULTI JOG dial to confirm the setting value and
reopen the
o
8ch BLOCK
An 8-channel block that includes the output connector se-
lected in step 1 appears to the left of the selection area.
Turn the MULTI JOG dial to select an output signal block.
Options:
Press the MULTI JOG dial to confirm the setting value and
reopen the
o
BATCH SETUP
RANGE SELECT
Press the MULTI JOG or . and /buttons to move the
blue cursor, and turn the MULTI JOG to set the following
values.
o Slot number and first and last numbers of the range of
output connectors for which you want to change set-
tings
o First number of the channel you want to route
Move the blue cursor to
dial to open a pop-up confirmation message.
and
When the confirmation pop-up message is open, press the
MULTI JOG dial to change to setting the multiple select-
ed channels at the same time, and reopen the
setting list.
ROUTING
When the confirmation pop-up message is open, press the
EXIT [PEAK CLEAR] button to close the message.
selected
–
CHANNEL 01
CHANNEL 64
setting list.
OUTPUT ROUTING
selected
,
CHANNEL 01-08
CHANNEL 09-16
,
CHANNEL 17-24
CHANNEL 25-32
,
CHANNEL 33-40
CHANNEL 41-48
,
CHANNEL 49-56
CHANNEL 57-64
(8 options)
setting list.
OUTPUT ROUTING
selected
appears to the left of the selection area.
and press the MULTI JOG
APPLY
.
EDIT MODE
(64 options)
,
,
,
OUTPUT
Advertisement
Table of Contents
