Tascam DA-6400 Manual page 12

Assigning takes to playlist entries (ASSIGN)
1.
Load the playlist to which you want to assign takes, and
open the playlist entry list screen.
2.
Turn the MULTI JOG dial to select the entry to which you
want to assign a take, and press the MULTI JOG dial to open
the menu.
3.
, and press the MULTI JOG dial to open the
Select
ASSIGN
screen.
ASSIGN TAKE
4.
Select the take that you want to assign on the
screen.
TAKE
Select files and move between directories in the same way
as on the screen.
BROWSE
NOTE
To cancel an ASSIGN operation, press the EXIT [PEAK CLEAR]
button to open the following pop-up message.
Press the MULTI JOG dial to return to the playlist entry list
screen.
Press the EXIT [PEAK CLEAR] button to close the pop-up
message.
5.
Press the MULTI JOG dial to open the menu.
6.
, and press the MULTI JOG dial to return to
Select
ASSIGN
the playlist entry list screen and assign the selected take to
the selected entry.
12
TASCAM DA-6400/DA-6400dp
DA-6400/DA-6400dp
Inserting playlist entries (INSERT)
You can insert an empty entry.
1.
Open the playlist entry list screen.
2.
Turn the MULTI JOG dial to select the position where you
want to create an empty entry, and press the MULTI JOG dial
to open the menu.
3.
Select
empty entry at the selected position.
ASSIGN
NOTE
If a take has been assigned to entry 999, which is the last pos-
sible playlist entry, the following pop-up message will appear.
Press the MULTI JOG dial to delete entry 999 and insert an
empty entry at the selected position.
Press the EXIT [PEAK CLEAR] button to close the pop-up
message without inserting an empty entry.
, and press the MULTI JOG dial to insert an
INSERT