Tascam DA-6400 Manual page 15

Deleting playlist entries (DELETE)
The selected entry can be deleted, moving following entries for-
ward.
1.
Open the playlist entry list screen.
2.
Turn the MULTI JOG dial to select the entry you want to de-
lete, and press the MULTI JOG dial to open the menu.
3.
Select and press the MULTI JOG dial to open a pop-
DELETE
up confirmation message.
4.
Press and hold the MULTI JOG to delete the selected entry
and move the following entries forward.
Press the EXIT [PEAK CLEAR] button to close the pop-up
message.
DA-6400/DA-6400dp
Editing playlist entries (ADJUST)
This explains how to edit the playback starting and ending points
of playlist entries.
NOTE
When a take is assigned, the take beginning and end are set as
the starting and ending points by default.
1.
Open the menu in one of the following ways.
1.1 Open the playlist entry list screen, turn the MULTI JOG
1.2 On the Home Screen, select the entry you want to edit,
2.
Select
START/END POINT
3.
The light blue part between the blue bars in the area at the
top of the
area.
The blue t on the left side is the playback starting point.
The blue g on the right side is the playback ending point.
The bar that can be edited will blink red.
The green b shows the current playback position.
The white b icons show marks have been added to the en-
try.
dial to select the entry you want to edit, and press the
MULTI JOG dial to open the menu.
and press the MENU button while pressing the SHIFT
button to open the menu.
, and press the MULTI JOG dial to open the
ADJUST
screen.
START/END POINT
TASCAM DA-6400/DA-6400dp
screen shows the playback
15