Tascam DA-6400 Manual page 27

4.
Adjust the output levels.
Options:
(default value) −
0.0dB
4.1 EDIT MODE: When EDIT MODE is
The output channel selected in step 1 is shown in this elec-
tion on the left side.
Turn the MULTI JOG dial to change/set the output level.
Press the MULTI JOG dial to open the OUTPUT ATTENUA-
TOR setting list screen.
4.2 EDIT MODE: When EDIT MODE is
Turn the MULTI JOG dial to change/set the output level for
all channels.
Press the MULTI JOG dial to set all channels to the output
level shown and open the OUTPUT ATTENUATOR setting
list screen.
4.3 EDIT MODE: When EDIT MODE is
appears on the left side of the second
RANGE SELECT
selection line.
Use the MULTI JOG dial or . and / buttons to move
the blue cursor, and turn the MULTI JOG dial to set the
starting and ending channel numbers for the range you
want to adjust.
Move the blue cursor to the
very bottom, and turn the MULTI JOG dial to change/set
the output level for all channels.
Press the MULTI JOG dial to set the selected channels to
the output level shown and open the OUTPUT ATTENUA-
TOR setting list screen.
NOTE
i When the item is set to
EDIT MODE
setting is shown for the output value.
i When the item is set to
EDIT MODE
ting for the starting channel set in the
is shown for the output value.
i If the setting values of the channels being adjusted do not
match, an * will be shown at the end of the output level value.
If the setting values of all the channels being adjusted match,
no * will be shown.
DA-6400/DA-6400dp
(0.5dB/step)
-14.0dB
Individual
ALL
BATCH SETUP
item at the
OUTPUT ATT.
, the OUTPUT 01
ALL
, the set-
BATCH SETUP
item
RANGE SELECT
TASCAM DA-6400/DA-6400dp
27