Selecting The Cpu Address - Siemens SIMATIC TD 200 User Manual

Note
Pressing ESC at any time while you are setting the network address for the TD200
aborts the edit and restores the previous value of the network address.

Selecting the CPU Address

The Setup menu allows you to enter the network address of the CPU. (The default
address for the CPU is 2.) Use the following procedure to change the network
address for the CPU:
Key
1.
ESC
2.
3.
4.
ENTER
5.
ENTER
Note
Pressing ESC at any time while you are setting the network address of the CPU
aborts the edit and restores the previous value of the CPU address.
SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01
Action
The TD 200 enters the Menu mode.
The TD 200 scrolls down the menu
options five times.
The TD 200 scrolls down the Setup
Menu to the CPU address option.
Press to move the cursor to the
ENTER
address field. Use the up or down
arrow keys to display the correct
address.
Press to store the new address
ENTER
for the CPU.
Operating the TD 200
Display
MENU MODE:
VIEW MESSAGES
SETUP MENU:
TD 200 ADDRESS
SETUP MENU:
CPU ADDRESS
SETUP MENU:
CPU ADDRESS
SETUP MENU:
CPU ADDRESS
1
2
2
3
3-17