Siemens SIMATIC TD 200 User Manual page 3

Preface
Purpose
The SIMATIC TD 200 Operator Interface User Manual is a combination user and
reference manual that describes the operation of the TD 200 Operator Interface
Module with an S7-200 programmable logic controller.
Audience
This manual is designed for engineers, programmers, and maintenance personnel
who have a general knowledge of programmable logic controllers and operator
interfaces.
Scope of This Manual
This manual describes the operation for version 2.0 of the TD 200. The order
number for the new TD 200 is 6ES7 272–0AA20–0YA0. This release includes new
features and other operational enhancements. The software described in this
manual is STEP 7–Micro/WIN version 3.1. Previous software versions may appear
and operate differently and may not support all the TD 200 features described in
this manual.
Release Notes
Version 2.0 of the TD 200 includes the following new features:
Supports the simplified Chinese characters and menus
Supports Latin 1 and Cyrillic character sets (Latin 1 is the standard character
set for English and Western European languages)
Supports 187.5 KB communications
Agency Approvals
The SIMATIC S7-200 series meets the standards and regulations of the following
agencies.
Underwriters Laboratories, Inc.:
UL 508 Listed (Industrial Control Equipment)
Canadian Standards Association: CSA C22.2 Number 142 Certified
(Process Control Equipment)
European Community EMC Directive 89/336/EEC and
Low Voltage Directive 73/23/EEC
SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01
iii