Specifications And Reference; Certificates, Directives And Declarations; Notes On The Ce Symbol; Emc Directive - Siemens SIMATIC TD 200 User Manual

Specifications and Reference

A.1

Certificates, Directives and Declarations

Notes on the CE Symbol

The following applies to the SIMATIC product described in this operating
instruction:

EMC Directive

This product fulfils the requirements for the EC directive 89/336/EEC on
"electromagnetic compatibility" and the following fields of application apply
according to this CE symbol:
Field of Application
Residential and commercial areas and
small businesses.
Industry

Low Voltage Directive

This product fulfils the requirements for the EC directive 73/23/EEC on "low
voltage" and was tested to EN60950.

Declaration of Conformity

The EC declarations of conformity and the documentation relating to this are
available to the authorities concerned, according to the above EC directive, from:
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
A&D AS E4
Fr. Zisler
Postfach 1963
D-92209 Amberg
Tel.: 09621 80 3283
Fax: 09621 80 3278

Observing the Setup Guidelines

The setup guidelines and notes on safety given in the manual must be observed
on startup and during operation.
A-2
Requirement For
Emitted Interference
EN 50081-1: 1992 EN 50082-1: 1992
EN 50081-2: 1993 EN 50082-2: 1995
SIMATIC TD 200 Operator Interface
Noise Immunity
C79000-G7076-C272-01