Siemens SIMATIC TD 200 User Manual page 33

For this example, type in the text shown in Figure 2-9. This example message has
two embedded data values, one in the top line and one in the second line. The
data value in the top line is an integer. The data value in the second line is a real
number.
A word value requires two characters for the value plus two more characters for
format information. Place the cursor at the character position shown in Figure 2-9
(four spaces from the right). Click on the "Embedded Data..." button to bring up the
Embedded Data dialog box.
TD 200 Configuration Wizard
TD200
Place cursor at the
correct position and
click "Embedded
Data..."
Figure 2-9 Wizard: Embedding Variable Data Value in a Message
SIMATIC TD 200 Operator Interface
C79000-G7076-C272-01
You have asked to configure 3 message(s). Define your message by
placing your highest priority message first.
Message 2 of 3
5
P R E V . S E T P O I N T
25
N E W S E T P O I N T
Message beginning address:
INS
Embedded Data... <Previous Message
Configuring the TD 200
10 15
:
30 35
:
VB80
Message enabled bit: V14.6
Next Message >
< Prev Finish
20
40
Cancel
2-11