Edition - Siemens SIMATIC TD 200 User Manual

Safety Guidelines
!
!
!
Qualified Personnel
Correct Usage
!
Trademarks
Copyright Siemens AG 2000 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design, are
reserved.
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschaeftsgebiet Industrie-Automatisierungssysteme
Postfach 4848, D-90327 Nuernberg
Siemens Aktiengesellschaft
This manual contains notices which you should observe to ensure your own per-
sonal safety, as well as to protect the product and connected equipment. These
notices are highlighted in the manual by a warning triangle and are marked as fol-
lows according to the level of danger:
Danger
indicates that death, severe personal injury, or substantial property damage will result
if proper precautions are not taken.
Warning
indicates that death, severe personal injury, or substantial property damage can result
if proper precautions are not taken.
Caution
indicates that minor personal injury or property damage can result if proper
precautions are not taken.
The device/system may only be set up and operated in conjunction with this
manual.
Only qualified personnel should be allowed to install and work on this equipment.
Qualified persons are defined as persons who are authorized to commission, to
ground, and to tag circuits, equipment, and systems in accordance with established
safety practices and standards.
Note the following:
Warning
This device and its components may only be used for the applications described in
the catalog or the technical description, and only in connection with devices or
components from other manufacturers which have been approved or recommended
by Siemens.
This product can only function correctly and safely if it is transported, stored, set up,
and installed correctly, and operated and maintained as recommended.
SIMATIC , SIMATIC HMI
Siemens AG.
are registered trademarks of
und SIMATIC NET
Disclaimer of Liability
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be pre-
cluded entirely, we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any necessary cor-
rections included in subsequent editions. Suggestions for improve-
ment are welcomed.
Siemens AG 2000
Subject to technical change.
6ES7272-0AA00-8BA0