Cleaning The Lenses - PRG BAD BOY 02.9812.0001C User Manual

B B ™ S L
AD OY POT UMINAIRE

Cleaning the Lenses

Tools and Supplies:
(2) Micro Fiber cloths (06.6085.0001.0)
OptiMax™ Ultra Pure Cleaning Solution (06.6084.0001.0)
Cotton gloves or finger cots
#2 Phillips screwdriver
Hook & Pick tool
To clean lenses:
CAUTION: Use caution when handling lenses. Avoid scratching optical surfaces.
CAUTION: Use ONLY OptiMax™ Ultra Pure Cleaning Solution to clean optical components. DO
NOT use Window Cleaner on lenses! Wear cotton gloves or finger cots when handling lenses/glass.
Step 1. Apply power to luminaire and set intensity to 20%. (A beam will be necessary to see dirt and
dust on the lenses.)
Step 2. Remove R1-side head cover to access Zoom Lens Assembly (head cover doors have a label
to identify them). See
Step 3. At menu TEST screen, press "Clean Lenses." The Cleaning Lenses screen will open.
Step 4. Press "Pos1" to position lenses in first cleaning configuration.
CAUTION: When cleaning, do not allow the cleaning cloth to come into contact with the lens carrier
rail. The rail has lubrication that will contaminate the cleaning cloth. Wear cotton gloves or finger cots.
Step 5. If lenses are only dusty, use Micro Fiber cloth to carefully wipe lens surfaces. If further
cleaning is required, use OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth to
clean.
Step 6. At menu, press "Pos2" to position lenses in second cleaning configuration. (This will allow
access to the remaining lens surfaces.)
6 6
U M
SER ANUAL
Figure 4-7
DO NOT use window cleaner!
on page 67.
02.9812.0001C