Enabling Pan/Tilt Free Mode - PRG BAD BOY 02.9812.0001C User Manual

B B ™ S L
AD OY POT UMINAIRE
Step 3. For each Handle Assembly, feed Lanyard through yoke handle, then feed Handle through
loop as shown in
Step 4. Thread Handles into Handle Mounts.

Enabling Pan/Tilt Free Mode

At Pan/Tilt Menu:
A "Free" mode is available at the Pan/Tilt Menu screen so that the
luminaire may be used as a follow spot fixture.
The FREE panel displays the current "free" setting. Press to bring
up Yes/No options. Yes will enable "free" control, which allows the
luminaire to be used as a follow spot.
Refer to "Pan/Tilt Screen"
about the Pan/Tilt Menu items.
Using Control Channels:
The Free mode may also be enabled/disabled using control
channels. Refer to
2 8
U M
SER ANUAL
Figure 2-18.
Lanyard
Follow Spot
Handle Assembly
Figure 2-18: Installing Follow Spot Handles - Step 2
on page 35 for additional information
"Control Channels"
Yoke Handle
on page 41.
Pan/Tilt Screen
02.9812.0001C