Standard Hang - PRG BAD BOY 02.9812.0001C User Manual

B B ™ S L
AD OY POT UMINAIRE

Standard Hang

WARNING: The luminaire is heavy. Use caution when lifting.
WARNING: Two safety cables and at least two truss hooks should be used in all hang configurations.
To install in standard 2-point hang:
Step 1. Unpack case and attach Hanging
Brackets. Refer to
Attaching Hanging Brackets"
page 13.
Step 2. Roll case to mounting location as
required
Step 3. Using two people, carefully lift
luminaire into mounting position.
Step 4. Secure in place by tightening Truss
Hook wing bolts
Ensure that luminaire is fully
supported.
Step 5. Feed safety cables through
mounting bracket slots and secure
around pipe as shown in
1 4
U M
SER ANUAL
2-Point Hang
Figure 2-3: Hanging Bracket Orientations
"Unpacking and
on
(Figure 2-4).
(Figure 2-5).
Figure 2-5.
Figure 2-4: Removing Luminaire From Case
3-Point Hang *
* Requires three brackets.
Truss Pipe
02.9812.0001C