Removing The Enclosure Covers - PRG BAD BOY 02.9812.0001C User Manual

B B ™ S L
AD OY POT UMINAIRE

Removing the Enclosure Covers

To access interior enclosure components, one or both of the Upper Enclosure Covers may need to be
removed.
Parts:
21.9812.0820
21.9812.0830
Tools and Supplies:
#2 Philips screwdriver
To remove Upper Enclosure Covers:
Step 1. At Upper Enclosure Cover, loosen two captive screws.
Step 2. Remove cover by pulling straight out until lip clears yoke support.
CAUTION: The Upper Enclosure Covers are not identical. One is for the Intake side and one for the
Exhaust side. Be sure to re-install covers in the proper location.
PRG Sticker
6 2
U M
SER ANUAL
1 EA ASSY, INTAKE COVER, UPPER ENCLOSURE
1 EA ASSY, EXHAUST COVER, UPPER ENCLOSURE
Exhaust Cover
Figure 4-3: Removing Upper Enclosure Covers
Intake Cover
Mesh Screen
Captive Screw (2)
02.9812.0001C