Routine Maintenance; Removing The Head Covers - PRG BAD BOY 02.9812.0001C User Manual

Routine Maintenance

Removing the Head Covers

To access some interior head components, one or both of the Head Covers may need to be removed.
Parts:
21.9812.0630
Tools and Supplies:
#2 Philips screwdriver (manual screwdriver only)
To remove Head Covers:
Step 1. At Head Cover, remove two 8-32 x 3/8" PPB screws
Step 2. Remove Head Cover from luminaire.
Aft Cover
CAUTION: DO NOT use a power screwdriver when re-installing the 8-32 x 3/" PPB screws. This
may damage the hole threads. Use a manual screwdriver only!
0 2. 9 8 1 2. 0 0 01 C
T
ROUBLESHOOTING AND
2 EA ASSY, HEAD COVER
R2 / Designer Wheel
Head Cover
Figure 4-1: Removing Head Covers
M : R
AINTENANCE OUTINE
(Figure 4-1).
Front
Ring
Casting
R1 Head Cover
Hand tighten only. DO NOT use a
CAUTION: power tool on Head Cover screws.
4
M
AINTENANCE
8-32 x 3/8" PPB
Screw (2 ea)
59