Control Channels - PRG BAD BOY 02.9812.0001C User Manual

Control Channels

ALL Control Channels require that the DMX value be held for 3 seconds, followed by an immediate
change to DMX 0 (without any other DMX values in between).
Zoom tables are dependent on distance to target, so several tables are provided to allow focus zoom at
different throws.
DMX Values
0 2. 9 8 1 2. 0 0 01 C
Table 3-6: Control Channels
Function
(0-255)
10 Recalibrate: All
12 Recalibrate: Zoom/Edge
14 Recalibrate: Color
16 Recalibrate: Gobos
18 Recalibrate: Dimmer/Strobe/Iris
19 Recalibrate: Pan/Tilt
20 Lamp: Douse
30 Lamp: Start
40 Lamp Power Limit Select: 1400W
45 Lamp Power Limit Select: 1200W
50 Lamp Power Limit Select: 900W
55 Lamp: Override Start-Up Power Limit
60 Zoom Table Select: 30
62 Zoom Table Select: 50
64 Zoom Table Select: 75
66 Zoom Table Select: 100
68 Zoom Table Select: 300
70 Zoom Table Select: 15
75 Zoom Speed Select: Maintain Focus
77 Zoom Speed Select: Move Fast
80 Gobo: Set Zero Position
90 Display: Turn Backlight ON
95 Display: Turn Backlight OFF
100 Pan: Lock
102 Pan: Unlock
104 Tilt: Lock
106 Tilt: Unlock
108 Pan/Tilt: Free Motion
110 Pan/Tilt: Free Lock
112 Pan/Tilt: End Free Motion
O
PERATION
Notes
default
Overrides default setting:
3 minute warm-up at 840W.
Throw
´ default
Throw
´
Throw
´
Zoom Tables maintain sharp focus on
Throw
´ an image throughout the zoom range.
Refer to page 46 for details.
Throw
´
Throw
´
default
Allows adjustment of the gobo wheel
home position. Refer to page 46 for
details.
: DMX512 O
PERATION
3
41