Table of Contents
Advertisement
s
16.1.4 Configuration I/O
(Configuration layer:
In the factory default configuration, all parameter settings for digital in-
puts and outputs will be hidden.
Parameter Function
Operating mode/
TYPE
measuring technique
LED.
LED (green)
LED.S
LED: define source
LED.F
LED function
LED switching
LED.T
threshold
LED.H
LED signal threshold
LED lower limit of
LED._
range
LED upper limit of
LED.~
range
LED.L
LED delay time
LED.M
LED hold time
BU2.
Buzzer
BUZ.S
Buzzer: define source
C010
)
L1
L2
RDY
L1.PR
L2.PR.
Q. PR.
1NTY.
M.TR.1
M.TR.2
M.TR.Q
DIRT
A.AC.1
A.AC.2
A.AC.9
LVL.
LVL.-
RN6.
RN6-
Temperature limit
(only available at function "Level")
Hysteresis +/- relative to signal threshold
(only available at function "Level")
Lower limit of range for switch signal
(only available function "range")
Upper limit of range for switch signal
(only available function "range")
L1.PR
L2.PR.
Q. PR.
27
Explanation
Q
ratio mode (quotient)
Lambda 1
Lambda 2
OFF
OFF
ON
ON
Status LED indicates 'ready'
L1
Lambda 1
Lambda 1 without peak picker
L2
Lambda 2
Lambda 2 without peak picker
Q
Two-colour/ratio mode
Two-colour/ratio mode without peak
picker
TU
Inner device temperature
Signal intensity
Triggered by ATD function Lambda 1*
Triggered by ATD function Lambda 2*
Triggered by ATD function two-
colour/ratio mode*
Dirt Alert
Measuring time ATD Lambda 1*
Measuring time ATD Lambda 2 *
Measuring time ATD
two colour/ratio mode
Switch direction "Level" (LED acti-
vated if limit exceeded)
Switch direction "Level" (LED
put inverted)
Switch direction "Range" (LED acti-
vated if range exceeded)
Switch direction "Range" (LED / out-
put inverted)
OFF
OFF
ON
ON
Status LED indicates 'ready'
RDY
L1
Lambda 1
Lambda 1 without peak picker
L2
Lambda 2
Lambda 2 without peak picker
Two-colour/ratio mode
Q
Two-colour/ratio mode without peak
picker
Operating manual
*
/
out-
Advertisement
Table of Contents
