Table of Contents
Advertisement
FLEX CABLE
EXTENDED PIPE
SETUP & OPERATION
Power Options
The Bandit in its standard configuration can be powered for one year
on two new D-Cell alkaline batteries (see notes). However, many
customers choose to power the Bandit by supplying 24 VDC power.
In extreme cold temperatures, 24 VDC will be necessary to power the
Bandit as a small heating element option (see pg. 33) is required.
Also, ATEX/IECEx guidelines require use of external 24 VDC power where
temperatures exceed +45°C.
See the Power Configuration chart on the following page to determine
which power option is required for your conditions.
NOTE: Bandits with optional 4-20mA Current Loop Interface
configuration require 24 VDC power.
They cannot be powered by batteries.
NOTE: If using batteries as a power source,
DURACELL® PROCELL (PC1300) D-Cell
alkaline batteries are required by ATEX and/or
IECEx standards to maintain system certification.
Always remove batteries before placing the unit into storage
and/or configuring for 24 VDC operation. Failure to do so
may result in damage and may void warranty.
CD52 Bandit (ATEX-IECEx Certification) User Guide
316 STAINLESS STEEL ENCLOSED
FLEX CABLE
w/STAINLESS
BASE
PORTABLE
WARNING:
Page 7 of 48
ENCLOSED
w/FLEX CABLE
PORTABLE
w/STAINLESS
BASE
SETUP & OPERATION
ENCLOSED
w/EXTENDED PIPE
Advertisement
Table of Contents
