Table of Contents
Advertisement
Board Settings for 24 VDC Power
Set jumper to Pin 2.
Tamb = –40°C ~ +70°C (24 VDC OPERATION)
Tamb = –40°C ~ +45°C (BATTERY OPERATION)
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
Replace front cover.
CD52 Bandit (ATEX-IECEx Certification) User Guide
ATEX/IECEx WARNINGS
USE ONLY DURACELL PC1300 BATTERIES
DO NOT MIX OLD WITH NEW BATTERIES
DO NOT OPEN WHEN ENERGIZED
EXPLOSION HAZARD – BATTERIES MUST ONLY BE
CHANGED IN AN AREA KNOWN TO BE NON-HAZARDOUS
BATTERY OPERATION ONLY ALLOWED TO MAXIMUM 45°C
DO NOT OPEN WHEN AN EXPLOSIVE GAS ATMOSPHERE
IS PRESENT
Page 11 of 48
SETUP & OPERATION
Advertisement
Table of Contents
