Table of Contents
Advertisement
INSTALLATION
When the portable Bandit is repositioned, pressing the Suspend button
a second time readies the portable Bandit to resume passage detection.
The Active Function Indicator F1–F2 cycle will cease.
NOTE: To avoid inadvertent triggering of a false passage, the portable
Bandit should be put into Suspend Mode before reviewing previous
passages. Exit Suspend Mode when you are finished reviewing previous
passages.
INSTALLATION
Standard and Stainless Steel Units
The Bandit can be installed on pig launchers, receivers,
and all pipelines from 50.8 mm to 1,524 mm [2 in. to 60 in.].
The Bandit's base is 508 mm [20 in.] long.
Make sure there is enough room
on the pipe for installation. To ensure
unimpeded movement of the interface
lever, it is recommended the Bandit
be mounted on a horizontal pipe.
CD52 Bandit (ATEX-IECEx Certification) User Guide
Page 28 of 48
Advertisement
Table of Contents
