Table of Contents
Advertisement
CD52 Bandit (ATEX-IECEx Certification) User Guide
SETUP & OPERATION
24 VDC & SCADA Connections
It is the customer's responsibility to provide their own wiring and conduit
for 24 VDC power and SCADA.* CDI recommends routing 24 VDC and
SCADA wiring through separate conduits. To route 24 VDC and SCADA into
the Bandit unit:
1. Standard Unit: Remove threaded
outlet plug(s) from the Killark junction
box as shown.
* SCADA (Supervisory Control and Data Acquisition) compatible standard relay
contacts can be used for passage annunciation (lights, horns, etc.) where an
unmanned passage must be monitored. SCADA-compatible 4-20mA option allows
connection to plant automation equipment using current loop interfacing.
Page 12 of 48
Advertisement
Table of Contents
