Table of Contents
Advertisement
SETUP & OPERATION
Display Rotation
During normal operation the Bandit automatically cycles between two
display screens. The first screen shows time and date of the most recent
pig passage. The second screen is the current (real) time.
For example: If a Bandit unit records its most recent pig passage at 3:35
on July 16, and the real time is 5:20
alternating every seven seconds as shown here:
REAL TIME
DISPLAYED
TIME
INDICATOR
MARKED
Interface Lever
The pivoting lever on the side of the unit has several functions:
•
Retrieving dates/times of the last ten passages
•
Clearing the recent passage indicator
•
Set the real-time clock
The lever contains a small magnet
that actuates a reed switch. Rotating
this lever controls all aspects of the
Bandit's user interface. In its neutral
(disengaged) position, the red lever
hangs down. To activate, rotate the
bottom of the lever away from you.
CD52 Bandit (ATEX-IECEx Certification) User Guide
PM
7
7
Page 22 of 48
, the operator will see two displays
SECONDS
SECONDS
PM
MOST-RECENT
PIG PASSAGE
MARKED
Advertisement
Table of Contents
