Table of Contents
Advertisement
SERVICE & MAINTENANCE
CD52 Bandit (ATEX-IECEx Certification) User Guide
Care and Maintenance
Equipment designed by CDI is protected against the environment in
which it is intended to operate. Much of the equipment is designed for
prolonged use in the field without any special maintenance other than
routine battery replacements. It is the Purchaser's responsibility to insure
that proper precautions are taken during installation and operation so
that weather seals are in place, routine maintenance occurs, etc. Failure
to perform these operations nullifies this warranty.
CDI equipment should only be operated by qualified personnel who are
familiar with any and all manuals and procedures for said equipment's
operation.
Operating equipment while in a damaged condition nullifies this warranty.
Service and Repairs
Cost for repairs not covered by the warranty or carried out after the
warranty period has expired will be charged at the current hourly or set
service rate, plus the cost of materials, upon approval by Purchaser.
Equipment for repair must be sent at the Purchaser's expense and be
accompanied by the Purchaser's written order describing the defect and
authorizing CDI to invoice the Purchaser for labor, materials and return
delivery cost.
No service or repair will be undertaken until an approved written order is
received from the Purchaser.
Operating equipment while in a damaged condition nullifies this warranty.
Page 36 of 48
Advertisement
Table of Contents
