Table of Contents
Advertisement
SETUP & OPERATION
Clearing the "Recent Passage" Flag
to manually terminate the blinking cycle (for example, when the Bandit
is used in a portable application or on a launcher or receiver). To clear
the recent passage display, rotate the Interface Lever into the "activated"
position (see pg. 22) and hold it there for a period of four (4) seconds.
Once cleared, release the lever to return the unit to normal operation.
Removing the "Recent Passage" message from the screen will not affect
anything in memory. The most recent pig passage time and date will cycle
every few seconds.
Setting the Clock
Occasionally it will be necessary to set the unit's real-time clock (see
note.) To do so, hold the lever in the activate position for a period of eight
(8) seconds. After eight seconds you will see the majority of the Bandit's
display go blank. Release the lever, and then briefly press and release it
one time. You should then see a display similar to this:
NOTE: the unit
calendar does not
automatically compensate
for a leap year, so it will be
necessary to re-set the unit
every February 29 to ensure
accuracy.
CD52 Bandit (ATEX-IECEx Certification) User Guide
The Recent Passage LCD segment will blink for
one hour after a pig passage then remain on for
an additional 11 hours. However, you may wish
Page 26 of 48
Advertisement
Table of Contents
