CDI CD52 Bandit User Manual page 23

Any time the Bandit's lever is activated, the "BTN" display segment will
confirm contact.
To ensure Bandit's availability under adverse
conditions (wind, icing, vandalism, etc.) that
could move the lever into the engaged position
while unattended, the unit will automatically
override the lever setting after one minute and
45 seconds, and automatically return to normal
operation.
Real-time Display
The primary purpose of the real-time display is to allow an operator to
quickly and easily confirm the clock is set to the correct time.
(See pg. 26 for instructions on setting the clock.)
The real-time display has the following characteristics:
BLINKING
TIME DISPLAY
TIME
INDICATOR
MARKED
CD52 Bandit (ATEX-IECEx Certification) User Guide
COLON
Page 23 of 48
SETUP & OPERATION
NO PASSAGE
INDICATORS MARKED