Wan Port Ping; Special Application Filter - Tenda TEI402M User Manual

Port: The executive web management port number.
IP Address: The IP address of the computer in WAN that remote
web manages.
Notes:
1. The default web management port of the router is 80, if the
web management port is changed (e.g..8080), the user
should input "IP : port number" (e.g.:http://192.168.0.1:8080)
to log on the router and enter the web management
interface.
2. The default IP address of computer that perform remote
web manages is 0.0.0.0. With default setting there's no
access for computers in WAN to log on the router and
execute the remote web management. If you change the
default setting, there is only access for computer in WAN to
log on the router and execute the remote web management
when the IP address of the computer (e.g..218.88.93.33) is
the same as the modified web management IP address of
the router (e.g.. 218.88.93.33).

3.3.6.5 WAN Port Ping

You can forbid the Ping from Wan by this function.

3.3.6.6 Special Application Filter

You can forbid MSN &QQ by this function.
3.3.7 Routing
3.3.7.1 Routing Table
3.3.7.2 Static Routing Table
This page set the static routing function of router and you can
designate static routing rule.
Notice:
1. The gateway IP and the Wan or LAN port must belong to the
TEI402M Multifunction Broad Band Router
16