Chapter 1 Installing OS
1.5
Disabling Legacy memory copy Function
Legacy memory copy function needs to be disabled.
1.
When you move the cursor onto "Server", the Server menu appears.
Move the cursor onto "Legacy memory copy" and press Enter.
Parameters will be displayed.
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware)
Important
If the Legacy memory copy function is "Enabled", be sure to set it to "Disabled"
before setup.
If the Legacy memory copy function is enabled, the system may be affected
unexpectedly.
Tips
For details of operations for BIOS Setup Utility and parameters for Legacy memory Copy
function, refer to Chapter 3 (1. System BIOS) in Maintenance Guide.
Some models may not show the "Legacy memory copy" items.
Important
If the BIOS version is lower than 8.1: 71 in the R320e-M4 model and R320e-E4 model,
upgrade BIOS to the latest version by referring to "Chapter 1 (4.1.6 BIOS update)" in the
"Maintenance Guide" before setting the Legacy memory copy function.
1. Setup Procedure
23