NEC Express5800/R320f-E4 Installation Manual page 48

Chapter 1 Installing OS
5. Select the storage that was selected when installing the ESXi host from [Select Storage], and select
[Next].
6. Select the options from [Deployment Options] as described below.
• Check (Input) the network name (Example: VM Network) to be used for the virtual machine in
[Network mappings].
• Select [Thick] for [Disk provisioning].
• Check that a check mark is placed in [Power on automatically]. Place a check mark if it is not
placed.
Select [Next].
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware)
48
Important ftSys Management Appliance must be installed on the disk where the ESXi host
exists.
Accordingly, you need to select a datastore name you have selected at installation
of ESXi.
Note For the storage that was selected when installing the ESXi host, select the data store name
that was checked in "1.9.1 Checking the Installation Destination Disk" of this chapter.
1. Setup Procedure