Configuring Vmware Esxi - NEC Express5800/R320f-E4 Installation Manual

Chapter 1 Installing OS

1.8.2 Configuring VMware ESXi

When LAN cables of the CPU/IO module 0 and 1 are removed, connect both of them.
Connect LAN cables to Port #1 connectors (1Gigabit) on CPU/IO modules 0 and 1. (At installation, the standard
switch (vSwitch0) is created on this connector.)
<R320e-E4 Model, R320f-E4 Model >
<R320e-M4 Model, R320f-M4 Model >
When the installed VMware ESXi boots, press F2 and log in to the system as a root user.
On the System Customization menu, configure each item as shown below.
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware)
Connect LAN cable here.
Connect LAN cable here.
1. Setup Procedure
39