Silvercrest SAVK 2000 A1 Operating Instructions Manual page 10

4. Switch on the iPod, iPhone/iPad and the television set or stereo
GB receiver to start playback.
Make sure that you have confi gured your iPod, iPhone or iPad to
send video signals to your television set and/or stereo receiver.
Further information can be found in your device's user guide. Also
observe the information in the user manuals of your television set,
stereo receiver or other devices in order to locate the appropriate
connections.
NOTICE
► If you are using an iPod without video support you can use
the cable for synchronising contents and for charging the
rechargeable battery.
5. If you want to charge your iPod, iPhone or iPad's rechargeable
battery connect the USB plug
adapter
6. Plug the mains adapter
installation. The LED operating indicator
5
Illustration: connection schematic
8
.
2
3
4
to the USB port
5
into an approved mains power socket
2
Video (yellow)
Audio left (white)
Audio right (red)
Initial operation
3 on the mains
lights up.
6
7
8
SAVK 2000 A1