Configuring Prepaid Cca For Diameter Or Radius - Cisco ASR 5000 Series Administration Manual

▀ Configuring Enhanced Features
Step 2
Configure the required Prepaid Credit Control Mode:
Configuring Diameter Prepaid Credit Control Application (DCCA)
Configuring RADIUS Prepaid Credit Control Application
Important:
the extent that the most common or likely commands and/or keyword options are presented. In many cases,
other optional commands and/or keyword options are available. Refer to the Command Line Interface
Reference for complete information regarding all commands.

Configuring Prepaid CCA for Diameter or RADIUS

To configure the Prepaid Credit Control Application for Diameter or RADIUS, use the following configuration:
configure
active-charging service <ecs_service_name>
charging-action <charging_action_name>
cca charging credit [ preemptively-request | rating-group <coupon_id> ]
exit
credit-control [ group <group_name> ]
mode { diameter | radius }
quota time-threshold { <absolute_value> | percent <percent_value> }
quota unit-threshold { <absolute_value> | percent <percent_value> }
quota volume-threshold { <absolute_value> | percent <percent_value> }
end
Notes:

<ecs_service_name>
Prepaid Credit Control Application.

<charging_action_name>
Credit Control Application.
 Optional: To configure the redirection of URL for packets that match a ruledef and action on quota request
timer, in the Charging Action Configuration Mode, enter the following command. This command also specifies
the redirect-URL action on packet and flow for Session Control functionality.
In 12.2 and later releases:
blowfish128 | blowfish64 } | { { aes128 | aes256 } [salt] } }[ encrypted ]
key<key> ] [ clear-quota-retry-timer ] [ first-request-only [ post-redirect {
allow | discard | terminate } ] ]
In 12.1 and earlier releases:
timer ]
▄ Cisco ASR 5x00 Enhanced Charging Services Administration Guide
96
Commands used in the configuration examples in this section provide base functionality to
must be the name of the Enhanced Charging Service in which you want to configure
must be the name of the charging action for which you want to configure Prepaid
flow action redirect-url <redirect_url> [ [ encryption {
flow action redirect-url <redirect_url> [ clear-quota-retry-
Enhanced Charging Service Configuration