Cisco ASR 5000 Series Administration Manual page 119

Enhanced Charging Service Configuration
Step 3 Create the x-header format as described in the
Step 4
Configure the x-header format as described in the
Step 5
Configure insertion of the x-header fields as described in the
Fields of x-header Fields section.
Creating the X-Header Format
To create an x-header format, use the following configuration:
configure
active-charging service <ecs_service_name>
xheader-format <xheader_format_name>
end
Configuring the X-Header Format
To configure an x-header format, use the following configuration:
configure
active-charging service <ecs_service_name>
xheader-format <xheader_format_name>
insert <xheader_field_name> { string-constant <xheader_field_value> | variable {
bearer { 3gpp { apn | charging-characteristics | charging-id | imei | imsi | qos | rat-
type | s-mcc-mnc | sgsn-address } | acr | customer-id | ggsn-address | mdn | msisdn-no-cc
| radius-calling-station-id | session-id | sn-rulebase | subscriber-ip-address | username
} [ encrypt ] | http { host | url } }
end
Configuring Charging Action for Insertion of X-Header Fields
To configure a charging action for insertion of x-header fields, use the following configuration:
configure
active-charging service <ecs_service_name>
charging-action <charging_action_name>
xheader-insert xheader-format <xheader_format_name> [ encryption rc4md5 [
encrypted ] key <key> ] [ first-request-only ] [ -noconfirm ]
end
Notes:
 If rc4md5 encryption is configured in the charging action, it will take precedence over RSA certificate based
encryption for flows hitting particular charging action.
Creating the x-header Format
Configuring the x-header Format
Configuring Charging Action for Insertion of X-Header
Cisco ASR 5x00 Enhanced Charging Services Administration Guide ▄
Configuring Enhanced Features ▀
section.
section.
119