Configuring Dns Snooping Feature; Configuring Edr/Udr Parameters - Cisco ASR 5000 Series Administration Manual

Enhanced charging services
Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

▀ Configuring Enhanced Features

Configuring DNS Snooping Feature

This section describes how to configure the DNS Snooping feature.
To configure the DNS Snooping feature use the following configuration:
configure
active-charging service <ecs_service_name>
ip dns-learnt-entries timeout <timeout_period>
ruledef <ruledef_name>
ip server-domain-name { = | contains | ends-with | starts-with
}<domain_name/domain_name_segment>
...
exit
rulebase <rulebase_name>
action priority <priority> ruledef <ruledef_name> charging-action
<charging_action_name>
...
end

Configuring EDR/UDR Parameters

This section provides an example configuration to configure EDR/UDR file transfer and file properties parameters,
including configuring hard disk support on SMC card on ASR 5000, transfer modes, transfer interval, etc.
To configure EDR/UDR file parameters:
configure
context <context_name>
edr-module active-charging-service [ charging | reporting ]
cdr { purge { storage-limit <storage_limit> | time-limit <time_limit> } [ max-files
<max_records_to_purge> ] | push-interval <push_interval> | push-trigger space-usage-
percent <trigger_percentage> | remove-file-after-transfer | transfer-mode { pull [
module-only ] | push primary { encrypted-url <encrypted_url> | url <url> } [ [ max-files
<max_records> ] [ module-only ] [ secondary { encrypted-secondary-url
<encrypted_secondary_url> | secondary-url <secondary_url> } ] [ via local-context ] + ] |
use-harddisk }
▄ Cisco ASR 5x00 Enhanced Charging Services Administration Guide
104
Enhanced Charging Service Configuration

Advertisement

Table of Contents
loading

Table of Contents