Verifying Your Configuration; Setting Edr Formats - Cisco ASR 5000 Series Administration Manual

Enhanced Charging Service Configuration
configure
context <context_name>
apn <apn_name>
active-charging rulebase-list <rulebase_list_name>
exit

Verifying your configuration

To verify your configuration for the rulebase list and APN, in the Exec mode, enter the following command:
show configuration
To verify your APN configuration, in the Exec mode, enter the following command:
show configuration apn <apn_name>

Setting EDR Formats

ECS generates postpaid charging data files which can be retrieved from the system periodically and used as input to a
billing mediation system for postprocessing.
EDRs are generated according to action statements in rule commands.
Up to 32 different EDR schema types may be specified, each composed of up to 32 fields or analyzer parameter names.
The records are written at the time of each rule event in a comma-separated (CSV) format.
Important:
To set the EDR formats use the following configuration:
configure
active-charging service <ecs_service_name>
edr-format <edr_format_name>
attribute <attribute> { [ format { MM/DD/YY-HH:MM:SS | MM/DD/YYYY-HH:MM:SS |
YYYY/MM/DD-HH:MM:SS | YYYYMMDDHHMMSS | seconds } ] [ localtime ] | [ { ip | tcp } { bytes
| pkts } { downlink | uplink } ] priority <priority> }
rule-variable <protocol> <rule> priority <priority>
event-label <event_label> priority <priority>
end
Important:
Configuration Mode Commands chapter of the Command Line Interface Reference.
If you have configured RADIUS Prepaid Billing, configuring charging records is optional.
For information on EDR format configuration and rule variables, refer to the EDR Format
Configuring the Enhanced Charging Service ▀
Cisco ASR 5x00 Enhanced Charging Services Administration Guide ▄
91